Aquarium-Lighting-Guide.com - Metal Halide, Fluorescent, Compact Fluorescent, VHO, T5  
» Aquarium-Lighting-Guide.com   » Aquarium Lighting Directory
Aquarium Lighting Guide
Introduction
Metal Halide
Flourescent
Compact Fluorescent
Metal Halide ANSI Codes
Glossary
Link to ALG
Contact
Privacy Policy
 
Directory
Manufacturers
Retailers
DIY Aquarium Lighting
Wiring Diagrams
 
 
» Metal Halide Aquarium Lighting




One of the most frequently asked questions when it comes to metal halide lighting is which bulb is compatible with which ballast. Most American made bulbs are going to be probe start bulbs, meaning that they have a starting electrode built into the bulb. Most European made bulbs are going to be pulse start bulbs, meaning that they are designed to operate on a ballast that has an igniter wired in the circuit. Often times probe start bulbs will run on pulse start ballasts, but doing so runs the risk of shortened bulb life and possibly creating a fire hazard.

If you plan on changing bulbs in the future, then you may want to consider purchasing an electronic ballast. An electronic ballast can run any bulb at the rated wattage. These ballasts run coller and consume less energy as compared to standard magnetic ballasts.

Double-ended metal halide bulbs, often referred to as HQI, are available in 3 wattages: 70 watts, 150 watts, and 250 watts. These bulbs require special ballasts to operate.

Iwasaki bulbs are actually mercury vapor bulbs and should be run on an EYE or mercury vapor ballast (250 watt - H37, 400 watt - H33). Iwasaki bulbs are available in 6500K.

The typical lifespan of a metal halide aquarium bulb is about 12 months.

For a list of aquarium Metal Halide bulbs and their corresponding ANSI codes, view the Metal Halide Bulb and Ballast Cross Reference Guide.
 
 
 
How much time will it take to restart a metal halide bulb after I turn off the power?
After a metal halide bulb is turned off, it could take as long as 10-12 minutes to restart.
 
Why does my metal halide bulb flicker and turn off?
New metal halide bulbs require up to 100 hours to burn in and could flicker or turn off during that "break in" period. If your bulbs are not new and flicker or turn off then you need to check that you are using the correct ballast for your bulb. Click here for metal halide ansi codes.
 
Can I overdrive a metal halide bulb?
With the exception of Radiums, no. Overdriving a metal halide bulb could possibly explode or damage both the ballast and bulb.
 
Can I run a metal halide bulb on DC current?
No, most metal halide bulbs are meant to be operated on AC current only.
 
What is the difference between a mogul base and medium base?
A medium base is pretty much identical to a regular household incandescent and is usually only available for lower wattage bulbs. Mogul bases are the standard for metal halide lighting.
 
How many hours each day should I run my metal halide?
When operating your metal halide without any supplemental lighting it is suggested that you run them 12 hours per day. When using supplemental lighting, such as VHO's or compact fluorescents, you can run the metal halides 8-10 hours per day in conjunction with 12 hours of supplemental lighting. For instance, the supplemental lighting could turn on 2 hours before the metal halides and turn off 2 hours after the metal halides do.
 
Do metal halides need a UV shield?
The outer envelope of a single ended metal halide bulb filters out most of the UV rays emitted from the arc tub. Double ended bulbs on the other hand do not have an outer envelope to filter UV, so it is necessary to use tempered glass to filter the UV rays.
 
How many metal halides do I need for my aquarium?
The general rule of thumb for even light distributution is 1 bulb for every two feet of tank lengthwise.
 
Do I need to supplement my metal halide lighting with actinics?
Although it has been proven that light in the blue end of the spectrum is beneficial to corals, the decision for actinics usually comes down to aesthetics. Bulbs in the 5500K - 6500K range are considered to be on the yellow side, and should be supplemented with actinics. 10,000K bulbs can stand alone but most aquarists will use actinic supplemental lighting. Any bulb above 10,000K can most likely stand alone without needing the use of actinics.
 
 
 
 

 

 
Aquarium-Lighting-Guide.com - Aquarium Lighting Resource
Coral Frag Trading & Coral Propagation Resources - FragOutpost.com